Genfloor / Waterproofing and Pools / 348 Genfloor Guard
WATERPROOFING AND POOLS · PROTECTIVE IMPREGNATION
348
Genfloor Guard
1K · Hydrophobic · Impregnation
Colourless, reactive hydrophobic impregnation protecting concrete and natural stone against water and oil.
A single-component, low-viscosity, colourless, reactive water- and oil-repellent impregnation. As a hydrophobic solution with a very small molecular structure, it penetrates into the pores without changing the appearance of the surface.
Technical Data
LIANT
Reactive hydrophobic solution
COMPOSANTS
Single-component (1K)
POSITION DANS LE SYSTÈME
Protective impregnation
DENSITÉ
0.85 ± 0.05 kg/L
EXTRAIT SEC EN VOLUME
25% ± 5
DILUTION
Do not thin
MÉTHODE D’APPLICATION
Brush, roller, low-pressure spray
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
Colourless
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Used on concrete port and pier piles, bridges and viaducts, concrete beneath asphalt roads, concrete and stone pavements, blocks, roof tiles and dams.
PRÉPARATION DE SURFACE ET APPLICATION
The surface must be clean, dry and sound. Apply the product unmixed by brush, roller or low-pressure spray until the surface is saturated. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
DOMAINES D’APPLICATION
→ Outdoor Areas, Terraces and Roofs
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
POINTS FORTS
— Water and oil repellent
— Does not change the surface appearance
— Small molecular structure for deep penetration
— Breathable surface
SYSTÈME RECOMMANDÉ
—