Genfloor / Epoxy Topcoats / 659 Genfloor Topcoat SF
EPOXY TOPCOATS · TOPCOAT
659
Genfloor Topcoat SF
2K · Solvent-free epoxy · Topcoat
Hygienic, smooth-finish, solvent-free epoxy floor paint for pedestrian and light vehicle traffic.
A two-component, hygienic, solvent-free epoxy topcoat with a smooth finish, applied on concrete and suitable for floors with pedestrian and light vehicle traffic.
Technical Data
LIANT
Epoxy resin
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Topcoat
DENSITÉ
1.45 ± 0.1 kg/L
EXTRAIT SEC EN VOLUME
Solvent-free (~100%)
BRILLANT / ASPECT
Gloss
RENDEMENT THÉORIQUE
3 m²/kg (single coat)
RAPPORT DE MÉLANGE
4 : 1 by weight (A : B)
DILUTION
Do not thin
MÉTHODE D’APPLICATION
Roller, trowel, squeegee
PRÉPARATION DE SURFACE
Milling / shot-blasting, moisture < 4%
RENDEMENT
—
SÉCHAGE
Dust dry 6–8 h · Touch dry 10–12 h · Full cure 7 days (23 °C)
CONDITIONNEMENT
20 kg kit (16 kg A + 4 kg B)
TEINTE
Produced on request in colours from the RAL colour chart.
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Used in production and storage areas with forklift traffic, loading ramps, supermarkets, multi-storey and underground car parks, exhibition halls.
PRÉPARATION DE SURFACE ET APPLICATION
New concrete must be cured for at least 28 days; surface moisture must not exceed 4%. Remove weak surface layers, laitance, oil, curing compounds and old coating residues by milling, shot-blasting or diamond grinding; remove the dust with an industrial vacuum. Repair cracks and holes with epoxy repair mortar. Prime the surface with 640 Genfloor Primer; apply the topcoat within 24 hours of priming. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply by roller, trowel or squeegee. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
DOMAINES D’APPLICATION
→ Factories and Production Plants
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
POINTS FORTS
— Smooth, hygienic finish
— Solvent-free, low odour
— Easy to clean
— RAL colour options
SYSTÈME RECOMMANDÉ
PRIMAIRE
640 Genfloor Primer