Genfloor / Special Performance Systems / 664 Genfloor Antistatic Coating
SPECIAL PERFORMANCE SYSTEMS · ANTISTATIC TOPCOAT
664
Genfloor Antistatic Coating
2K · Solvent-free epoxy · Antistatic
Solvent-free antistatic epoxy topcoat for areas with explosion risk and sensitive electronics.
A two-component, solvent-free, epoxy-based topcoat forming the wearing layer of the antistatic epoxy floor system. It conducts static charges to earth in a controlled way.
Technical Data
LIANT
Epoxy resin
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Antistatic topcoat
DENSITÉ
1.60 ± 0.1 kg/L
EXTRAIT SEC EN VOLUME
Solvent-free (~100%)
DILUTION
Do not thin
MÉTHODE D’APPLICATION
Notched trowel, squeegee, spiked roller
PRÉPARATION DE SURFACE
Milling / shot-blasting, moisture < 4%
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
Produced on request in colours from the RAL colour chart.
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Used on industrial floors, in hospitals, operating theatres, laboratories, production and storage areas, and in areas with sensitive electrical and electronic equipment and explosion risk.
PRÉPARATION DE SURFACE ET APPLICATION
The system is applied over 640 Genfloor Primer and 647 Conductive Primer. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Spread with a squeegee and notched trowel and de-aerate with a spiked roller. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
DOMAINES D’APPLICATION
→ Pharmaceutical, Hospital and Laboratory
→ Aircraft Hangars and Defence Industry
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
POINTS FORTS
— Controlled dissipation of static electricity
— Safety in areas with explosion risk
— Seamless, hygienic surface
— Solvent-free
SYSTÈME RECOMMANDÉ
PRIMAIRE
640 Genfloor Primer + 647 Conductive Concrete Primer