Genfloor / Hygienic Wall Coatings / 670 Genfloor Topcoat Wall SF

HYGIENIC WALL COATINGS · WALL AND SURFACE TOPCOAT
670
Genfloor Topcoat Wall SF
2K · Solvent-free epoxy · Cycloaliphatic
Solvent-free, hygienic epoxy wall and surface coating cured with cycloaliphatic polyamine.
A two-component, solvent-free coating based on epoxy resin and cured with a cycloaliphatic polyamine. Its odourless nature allows safe application in facilities that remain in operation.
Technical Data
LIANT
Epoxy / cycloaliphatic polyamine
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Wall and surface topcoat
DENSITÉ
1.55 ± 0.1 kg/L
EXTRAIT SEC EN VOLUME
Solvent-free (~100%)
DILUTION
Do not thin
MÉTHODE D’APPLICATION
Roller, brush
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
Produced on request in colours from the RAL colour chart.
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Can be applied in factories, warehouses, shopping centres, workshops, aircraft hangars, schools, hospitals, the pharmaceutical and food sectors, laboratories, car parks, treatment plants and areas where corrosive chemicals are used.
PRÉPARATION DE SURFACE ET APPLICATION
The surface must be sound, clean and dry. Prime the surface with 640 Genfloor Primer. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply by roller or brush. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
DOMAINES D’APPLICATION
→ Pharmaceutical, Hospital and Laboratory
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
POINTS FORTS
— Solvent-free, low odour
— High chemical resistance with cycloaliphatic cure
— Hygienic, washable surface
— For vertical and horizontal surfaces
SYSTÈME RECOMMANDÉ
PRIMAIRE
640 Genfloor Primer
