Genfloor / Hygienic Wall Coatings / 672 Genfloor Topcoat Chem Wall
HYGIENIC WALL COATINGS · CHEMICAL-RESISTANT WALL TOPCOAT
672
Genfloor Topcoat Chem Wall
2K · Solvent-free epoxy · Chemical resistance
Solvent-free epoxy topcoat for vertical surfaces exposed to chemicals.
A two-component, solvent-free epoxy topcoat developed for vertical surfaces and resistant to chemicals.
Technical Data
LIANT
Epoxy resin
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Chemical-resistant wall topcoat
DENSITÉ
1.55 ± 0.1 kg/L
EXTRAIT SEC EN VOLUME
Solvent-free (~100%)
DILUTION
Do not thin
MÉTHODE D’APPLICATION
Roller, brush
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
Produced on request in colours from the RAL colour chart.
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Used as a topcoat on ceramic walls, in laboratories, hospitals, food plants, swimming pools and water tanks, toilets and on vertical surfaces of industrial facilities exposed to chemicals.
PRÉPARATION DE SURFACE ET APPLICATION
The surface must be sound, clean and dry; use 641 Ceramic Surface Primer on ceramic tiles. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply by roller or brush. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
DOMAINES D’APPLICATION
→ Pharmaceutical, Hospital and Laboratory
→ Chemical, Petrochemical and Treatment
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
POINTS FORTS
— Chemical resistance on vertical surfaces
— Solvent-free
— Hygienic, non-porous surface
— Can be applied over ceramic tiles (with 641)
SYSTÈME RECOMMANDÉ
PRIMAIRE
640 Genfloor Primer or 641 Ceramic Surface Primer