Genfloor / Decorative and Clear Systems / 690 Genfloor Epoxy Topcoat Varnish
DECORATIVE AND CLEAR SYSTEMS · CLEAR TOPCOAT
690
Genfloor Epoxy Topcoat Varnish
2K · Modified epoxy · Crystal gloss
Crystal-gloss, clear, solvent-free epoxy varnish for concrete and other surfaces.
A two-component, crystal-gloss, clear concrete varnish made of modified epoxy resin and hardener. It is also an excellent protective coat for metal and steel-reinforced surfaces.
Technical Data
LIANT
Modified epoxy
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Clear topcoat
DENSITÉ
1.05 ± 0.05 kg/L
EXTRAIT SEC EN VOLUME
Solvent-free (~100%)
BRILLANT / ASPECT
Crystal gloss
DILUTION
Do not thin
MÉTHODE D’APPLICATION
Roller, brush
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
Clear
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Main areas of use are factories, shopping centres, aircraft and helicopter hangars, schools, hospitals, the pharmaceutical and food sectors, laboratories and treatment plants.
PRÉPARATION DE SURFACE ET APPLICATION
The surface must be sound, clean and dry. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply by roller in thin, even coats. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
DOMAINES D’APPLICATION
→ Aircraft Hangars and Defence Industry
→ Shopping Centres, Retail, Schools and Offices
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
POINTS FORTS
— Crystal-gloss clear surface
— Preserves the natural look of concrete
— Protective on metal surfaces
— Solvent-free
SYSTÈME RECOMMANDÉ
—