Genfloor / Decorative and Clear Systems / 750 Genfloor Liquid Glass
DECORATIVE AND CLEAR SYSTEMS · CLEAR PROTECTIVE COAT
750
Genfloor Liquid Glass
2K · Clear · Waterproofing
Clear liquid glass for waterproofing and decorative use, unaffected by UV and weathering.
A clear, two-component product with excellent water resistance and high chemical and physical resistance, used for waterproofing and decorative purposes. It is unaffected by ultraviolet light and outdoor weather conditions.
Technical Data
LIANT
Two-component clear resin
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Clear protective coat
DENSITÉ
0.95 ± 0.05 kg/L
EXTRAIT SEC EN VOLUME
35% ± 3
RENDEMENT THÉORIQUE
7 m²/kg (single coat)
RAPPORT DE MÉLANGE
7 : 1 by weight (A : B)
MÉTHODE D’APPLICATION
Roller, brush
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
4 kg kit (3.5 kg A + 0.5 kg B)
TEINTE
Clear
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Used on glass, mosaic, tiles, marble, granite, natural stone, pressed brick and wood; on balconies, terraces, bathrooms and kitchens.
PRÉPARATION DE SURFACE ET APPLICATION
The surface must be clean, dry and sound; repair joints and cracks. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply by roller or brush. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
DOMAINES D’APPLICATION
→ Outdoor Areas, Terraces and Roofs
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
POINTS FORTS
— Clear waterproofing
— UV and weather resistance
— Chemical and physical resistance
— Applied without removing the existing finish
SYSTÈME RECOMMANDÉ
—