Genfloor / Waterproofing and Pools / 763 Gen Pool Paint
WATERPROOFING AND POOLS · POOL TOPCOAT
763
Gen Pool Paint
2K · Polyurethane · Pool paint
Elastic polyurethane pool paint resistant to water pressure, for pools, water tanks and water structures.
A ready-to-use, two-component, elastic pool paint based on polyurethane resin, easily applied on all kinds of substrate and resistant to water and water pressure.
Technical Data
LIANT
Polyurethane
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Pool topcoat
DENSITÉ
1.25 ± 0.1 kg/L
EXTRAIT SEC EN VOLUME
50% ± 3
RENDEMENT THÉORIQUE
3 m²/kg (single coat)
RAPPORT DE MÉLANGE
7 : 1 by weight (A : B)
MÉTHODE D’APPLICATION
Brush, roller, spray
NOMBRE DE COUCHES
2 coats
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
Drying 24 h · Full cure before filling with water 10 days
CONDITIONNEMENT
16 kg kit (14 kg A + 2 kg B)
TEINTE
—
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Used in swimming pools, water tanks and reservoirs, metal tanks and cisterns, ornamental ponds, lakes, dams, water channels, treatment and balancing tanks; on concrete, plaster and screed.
PRÉPARATION DE SURFACE ET APPLICATION
The surface must be clean, dry and free from foreign matter; fill voids and holes with repair mortar. Apply the mix by brush, roller or suitable spray equipment; apply the second coat within 24 hours once the first coat has dried. Use the mixed material within 5–6 hours. Allow 10 days of full cure before filling the pool with water.
DOMAINES D’APPLICATION
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
POINTS FORTS
— Elastic film
— Resistance to water and water pressure
— On concrete, plaster and screed
— Easy application
SYSTÈME RECOMMANDÉ
—