Genfloor / Polyurethane Systems / 832 Genfloor Polyurethane Floor Basecoat
POLYURETHANE SYSTEMS · SELF-LEVELLING COATING
832
Genfloor Polyurethane Floor Basecoat
2K · Solvent-free PU · Self-levelling
Solvent-free, hygienic polyurethane floor coating for cold stores and heavy forklift traffic.
A solvent-free, two-component, self-levelling, hygienic polyurethane floor coating with high mechanical strength. The flexibility of polyurethane gives superior resistance to impact and thermal shock.
Technical Data
LIANT
Polyurethane
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Self-levelling coating
DENSITÉ
1.35 ± 0.1 kg/L
EXTRAIT SEC EN VOLUME
Solvent-free (~100%)
DILUTION
Do not thin
MÉTHODE D’APPLICATION
Notched trowel, squeegee, spiked roller
PRÉPARATION DE SURFACE
Milling / shot-blasting, moisture < 4%
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
Produced on request in colours from the RAL colour chart.
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Can be applied in factories, cold stores, refrigerated vehicle bodies, shopping centres, workshops, aircraft hangars, schools, hospitals, the pharmaceutical and food sectors, laboratories and areas with heavy forklift traffic.
PRÉPARATION DE SURFACE ET APPLICATION
New concrete must be cured for at least 28 days; surface moisture must not exceed 4%. Remove weak surface layers, laitance, oil, curing compounds and old coating residues by milling, shot-blasting or diamond grinding; remove the dust with an industrial vacuum. Repair cracks and holes with epoxy repair mortar. Prime the surface with 640 Genfloor Primer. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Spread with a squeegee and notched trowel and de-aerate with a spiked roller. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
DOMAINES D’APPLICATION
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
POINTS FORTS
— Flexible; impact and thermal-shock resistance
— Suitable for cold stores
— Hygienic, seamless surface
— Solvent-free
SYSTÈME RECOMMANDÉ
PRIMAIRE
640 Genfloor Primer
COUCHES SUIVANTES
Where exposed to UV, complete with 834 Genfloor Polyurethane Topcoat.