Genfloor / Acrylic Floor and Road Marking / 842 Gen Floor Paint
ACRYLIC FLOOR AND ROAD MARKING · TOPCOAT
842
Gen Floor Paint
1K · Acrylic / MMA · Floor paint
Fast-drying, single-component acrylic floor paint for concrete and asphalt.
A single-component, solvent-borne, air-curing decorative and protective floor paint made of acrylic oligomer and MMA monomer, suitable for concrete and asphalt surfaces.
Technical Data
LIANT
Acrylic oligomer / MMA
COMPOSANTS
Single-component (1K)
POSITION DANS LE SYSTÈME
Topcoat
DENSITÉ
1.25 ± 0.1 kg/L
EXTRAIT SEC EN VOLUME
50% ± 5
RENDEMENT THÉORIQUE
5 m²/kg (single coat)
DILUTION
Do not thin; ready to use
MÉTHODE D’APPLICATION
Roller, brush
NOMBRE DE COUCHES
2 coats
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
Touch dry 7 h · Recoat 24 h · Fully dry 24 h
CONDITIONNEMENT
18 kg
TEINTE
Stock colours: RAL 5015 Blue, RAL 7040 Grey, RAL 1003 Yellow, RAL 3020 Red, RAL 6024 Green, RAL 9003 White, RAL 9005 Black
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Used on cycle paths, areas with light pedestrian traffic, warehouses, walkways, shop and office floors and all areas where fast drying is expected.
PRÉPARATION DE SURFACE ET APPLICATION
Remove dust, dirt and oil; scrape off old paint residues and repair cracks with repair mortar. The surface must be completely dry. Stir the product thoroughly and apply two coats by roller or brush, allowing 24 hours between coats. Application temperature must be between +5 °C and +30 °C.
DOMAINES D’APPLICATION
→ Shopping Centres, Retail, Schools and Offices
→ Roads, Cycle Paths and Walkways
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
POINTS FORTS
— Single-component, ready to use
— Suitable for concrete and asphalt
— Fast drying
— 7 stock colours
SYSTÈME RECOMMANDÉ
PRIMAIRE
841 Gen Floor Paint Primer
COUCHES SUIVANTES
843 Gen Floor Paint Protective Varnish