Genfloor / Epoxy Topcoats / 659 Genfloor Topcoat SF
EPOXY TOPCOATS · TOPCOAT
659
Genfloor Topcoat SF
2K · Solvent-free epoxy · Topcoat
Hygienic, smooth-finish, solvent-free epoxy floor paint for pedestrian and light vehicle traffic.
A two-component, hygienic, solvent-free epoxy topcoat with a smooth finish, applied on concrete and suitable for floors with pedestrian and light vehicle traffic.
Technical Data
СВЯЗУЮЩЕЕ
Epoxy resin
КОМПОНЕНТЫ
Two-component (2K)
МЕСТО В СИСТЕМЕ
Topcoat
ПЛОТНОСТЬ
1.45 ± 0.1 kg/L
СУХОЙ ОСТАТОК ПО ОБЪЁМУ
Solvent-free (~100%)
БЛЕСК / ВИД
Gloss
ТЕОРЕТИЧЕСКИЙ РАСХОД
3 m²/kg (single coat)
СООТНОШЕНИЕ СМЕШИВАНИЯ
4 : 1 by weight (A : B)
РАЗБАВЛЕНИЕ
Do not thin
СПОСОБ НАНЕСЕНИЯ
Roller, trowel, squeegee
ПОДГОТОВКА ПОВЕРХНОСТИ
Milling / shot-blasting, moisture < 4%
РАСХОД
—
ВЫСЫХАНИЕ
Dust dry 6–8 h · Touch dry 10–12 h · Full cure 7 days (23 °C)
УПАКОВКА
20 kg kit (16 kg A + 4 kg B)
ЦВЕТ
Produced on request in colours from the RAL colour chart.
ТЕХНИЧЕСКАЯ ДОКУМЕНТАЦИЯ
Применение и нанесение
ОБЛАСТИ ПРИМЕНЕНИЯ
Used in production and storage areas with forklift traffic, loading ramps, supermarkets, multi-storey and underground car parks, exhibition halls.
ПОДГОТОВКА ПОВЕРХНОСТИ И НАНЕСЕНИЕ
New concrete must be cured for at least 28 days; surface moisture must not exceed 4%. Remove weak surface layers, laitance, oil, curing compounds and old coating residues by milling, shot-blasting or diamond grinding; remove the dust with an industrial vacuum. Repair cracks and holes with epoxy repair mortar. Prime the surface with 640 Genfloor Primer; apply the topcoat within 24 hours of priming. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply by roller, trowel or squeegee. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
ОБЛАСТИ ПРИМЕНЕНИЯ
→ Factories and Production Plants
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
КЛЮЧЕВЫЕ ПРЕИМУЩЕСТВА
— Smooth, hygienic finish
— Solvent-free, low odour
— Easy to clean
— RAL colour options
РЕКОМЕНДАЦИЯ ПО СИСТЕМЕ
ГРУНТ
640 Genfloor Primer