Genfloor / Self-Levelling Systems / 660 Genfloor Self Levelling Topcoat
SELF-LEVELLING SYSTEMS · SELF-LEVELLING TOPCOAT
660
Genfloor Self Levelling Topcoat
2K · Solvent-free epoxy · Self-levelling
Gloss, solvent-free self-levelling epoxy floor coating resistant to forklift traffic.
A two-component, solvent-free, self-levelling epoxy topcoat. It forms a seamless, glossy, easy-to-clean surface with high mechanical strength and chemical resistance.
Technical Data
СВЯЗУЮЩЕЕ
Epoxy resin
КОМПОНЕНТЫ
Two-component (2K)
МЕСТО В СИСТЕМЕ
Self-levelling topcoat
ПЛОТНОСТЬ
1.65 ± 0.1 kg/L
СУХОЙ ОСТАТОК ПО ОБЪЁМУ
Solvent-free (~100%)
БЛЕСК / ВИД
Gloss
ТЕОРЕТИЧЕСКИЙ РАСХОД
1.5 kg/m² per 1 mm thickness
СООТНОШЕНИЕ СМЕШИВАНИЯ
4 : 1 by weight (A : B)
РАЗБАВЛЕНИЕ
Do not thin
СПОСОБ НАНЕСЕНИЯ
Notched trowel, squeegee, spiked roller
ПОДГОТОВКА ПОВЕРХНОСТИ
Milling / shot-blasting, moisture < 4%
РАСХОД
—
ВЫСЫХАНИЕ
Dust dry 3–4 h · Touch dry 10–12 h · Full cure 7 days
УПАКОВКА
20 kg kit (16 kg A + 4 kg B)
ЦВЕТ
Produced on request in colours from the RAL colour chart.
ТЕХНИЧЕСКАЯ ДОКУМЕНТАЦИЯ
Применение и нанесение
ОБЛАСТИ ПРИМЕНЕНИЯ
Used in production and storage areas with forklift traffic, loading ramps, supermarkets, multi-storey and underground car parks, exhibition halls and all areas requiring mechanical resistance.
ПОДГОТОВКА ПОВЕРХНОСТИ И НАНЕСЕНИЕ
New concrete must be cured for at least 28 days; surface moisture must not exceed 4%. Remove weak surface layers, laitance, oil, curing compounds and old coating residues by milling, shot-blasting or diamond grinding; remove the dust with an industrial vacuum. Repair cracks and holes with epoxy repair mortar. Prime the surface with 640 Genfloor Primer. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Pour the mix onto the floor, spread with a notched trowel or squeegee and de-aerate with a spiked roller. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
ОБЛАСТИ ПРИМЕНЕНИЯ
→ Factories and Production Plants
→ Warehouses and Logistics Centres
→ Pharmaceutical, Hospital and Laboratory
→ Shopping Centres, Retail, Schools and Offices
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
КЛЮЧЕВЫЕ ПРЕИМУЩЕСТВА
— Seamless, smooth and glossy surface
— Resistant to forklift and heavy traffic
— Chemical resistance
— Hygienic and easy to clean
— RAL colour options
РЕКОМЕНДАЦИЯ ПО СИСТЕМЕ
ГРУНТ
640 Genfloor Primer (with 657 Self Levelling Basecoat as intermediate coat if required)