Genfloor / Waterproofing and Pools / 763 Gen Pool Paint
WATERPROOFING AND POOLS · POOL TOPCOAT
763
Gen Pool Paint
2K · Polyurethane · Pool paint
Elastic polyurethane pool paint resistant to water pressure, for pools, water tanks and water structures.
A ready-to-use, two-component, elastic pool paint based on polyurethane resin, easily applied on all kinds of substrate and resistant to water and water pressure.
Technical Data
СВЯЗУЮЩЕЕ
Polyurethane
КОМПОНЕНТЫ
Two-component (2K)
МЕСТО В СИСТЕМЕ
Pool topcoat
ПЛОТНОСТЬ
1.25 ± 0.1 kg/L
СУХОЙ ОСТАТОК ПО ОБЪЁМУ
50% ± 3
ТЕОРЕТИЧЕСКИЙ РАСХОД
3 m²/kg (single coat)
СООТНОШЕНИЕ СМЕШИВАНИЯ
7 : 1 by weight (A : B)
СПОСОБ НАНЕСЕНИЯ
Brush, roller, spray
КОЛИЧЕСТВО СЛОЁВ
2 coats
РАСХОД
—
РАСХОД
—
РАСХОД
—
ВЫСЫХАНИЕ
Drying 24 h · Full cure before filling with water 10 days
УПАКОВКА
16 kg kit (14 kg A + 2 kg B)
ЦВЕТ
—
ТЕХНИЧЕСКАЯ ДОКУМЕНТАЦИЯ
Применение и нанесение
ОБЛАСТИ ПРИМЕНЕНИЯ
Used in swimming pools, water tanks and reservoirs, metal tanks and cisterns, ornamental ponds, lakes, dams, water channels, treatment and balancing tanks; on concrete, plaster and screed.
ПОДГОТОВКА ПОВЕРХНОСТИ И НАНЕСЕНИЕ
The surface must be clean, dry and free from foreign matter; fill voids and holes with repair mortar. Apply the mix by brush, roller or suitable spray equipment; apply the second coat within 24 hours once the first coat has dried. Use the mixed material within 5–6 hours. Allow 10 days of full cure before filling the pool with water.
ОБЛАСТИ ПРИМЕНЕНИЯ
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
КЛЮЧЕВЫЕ ПРЕИМУЩЕСТВА
— Elastic film
— Resistance to water and water pressure
— On concrete, plaster and screed
— Easy application
РЕКОМЕНДАЦИЯ ПО СИСТЕМЕ
—