top of page

Genfloor / Polyurethane Systems / 834 Genfloor Polyurethane Floor Topcoat

Gen Boya 834 Genfloor Poliüretan Zemin Kaplama Topcoat ambalaj görseli

POLYURETHANE SYSTEMS · UV-PROTECTIVE TOPCOAT

834

Genfloor Polyurethane Floor Topcoat

2K · Polyurethane · UV resistance

Polyurethane protective topcoat for floors requiring UV resistance outdoors.

A ready-to-use, two-component, polyurethane-based protective topcoat with high UV resistance. It provides colour and gloss retention over epoxy floor systems.

Technical Data

СВЯЗУЮЩЕЕ

Polyurethane

КОМПОНЕНТЫ

Two-component (2K)

МЕСТО В СИСТЕМЕ

UV-protective topcoat

ПЛОТНОСТЬ

1.30 ± 0.1 kg/L

СУХОЙ ОСТАТОК ПО ОБЪЁМУ

60% ± 5

ТЕОРЕТИЧЕСКИЙ РАСХОД

4 m²/kg (single coat)

СООТНОШЕНИЕ СМЕШИВАНИЯ

4 : 1 by weight (A : B)

РАЗБАВЛЕНИЕ

018 Gen Polyurethane Thinner

СПОСОБ НАНЕСЕНИЯ

Roller, brush

РАСХОД

—

РАСХОД

—

РАСХОД

—

ВЫСЫХАНИЕ

—

УПАКОВКА

15 kg kit (12 kg A + 3 kg B)

ЦВЕТ

Produced on request in colours from the RAL colour chart.

ТЕХНИЧЕСКАЯ ДОКУМЕНТАЦИЯ

Применение и нанесение

ОБЛАСТИ ПРИМЕНЕНИЯ

Used as a protective coat on all kinds of metal surfaces and as a topcoat on epoxy floor coatings, particularly outdoors where UV resistance is required.

 

ПОДГОТОВКА ПОВЕРХНОСТИ И НАНЕСЕНИЕ

The epoxy floor to be coated must be clean, dry and lightly sanded. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply in thin coats by roller or brush. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.

 

ОБЛАСТИ ПРИМЕНЕНИЯ

→ Car Parks and Ramps

→ Outdoor Areas, Terraces and Roofs

 

Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.

КЛЮЧЕВЫЕ ПРЕИМУЩЕСТВА

— High UV resistance

— Resistance to yellowing and chalking

— Topcoat over epoxy systems

— Also suitable for metal surfaces

РЕКОМЕНДАЦИЯ ПО СИСТЕМЕ

ГРУНТ

Applied over epoxy floor systems (659, 660).

Правильная система для вашего пола — с техническими специалистами Genfloor.

Наши эксперты сопровождают проект на каждом этапе: анализ основания, замер влажности, выбор системы и расчёт расхода.

bottom of page