SOLVENT-FREE EPOXY FINISHING PAINT
GEN Floor Solvent-free, self-leveling, mechanical strength and chemical resistance
It is a high epoxy based coating material. It has excellent adhesion to many dry and clean surfaces.
After this system has completed its reaction, water, salt solutions, bases, diluted acids, gasoline and
It is resistant to mineral oils.
Surface Preparation and Application Method
The entire area to be applied should be examined and cracked and loose concrete parts should be determined. Newly poured concrete should be waited for at least 28 days. There should be no moisture on the application surface (<6% up to 10 mm). The surface should be cleaned of loose concrete particles, cement grout, oil and similar dirt with methods suitable for the ambient conditions and made ready for coating. Metal, steel and iron surfaces should be cleaned with a suitable mechanical process. For a successful result, the surface should be completely cleaned of oil, grease and similar substances. Cleaning with solvents generally does not give successful results. The safest way is to scrape, sandblast or flame the area where the unwanted substances are located.
Dilution / Mixing Ratio
No thinner required. By weight: A/B: 16.5/3.5 Units
Paintable (Coatable) Area
0.2-0.3 kg/m²
Drying Time
Dust Dry: 8-10 hours at 23°C. Touch Dry: 12-14 hours at 23°C. Full Dry: 7 days at 23°C.
Recommended Application Appliances
Airless Spray, Gun, Brush, Roller
PACKAGING
A/B: 16.5/ 3.5 = 20 kg set