Gen Marine / Primers and Anti-corrosive Systems / 602 Genepox Primer Marine
PRIMERS AND ANTI-CORROSIVE SYSTEMS · PRIMER
602
Genepox Primer Marine
2K · Solvent-borne epoxy · Marine atmosphere
Two-component epoxy primer with excellent water resistance for structures and vessels in corrosive marine atmospheres.
A two-component, solvent-borne epoxy primer used on structures exposed to corrosive atmospheres and on marine vessels. It has excellent water resistance and provides long-term protection in highly corrosive environments.
Technical Data
BINDER
Epoxy
COMPONENTS
Two-component (2K)
POSITION IN SYSTEM
Primer
DENSITY
1,45 ± 0,1 kg/L
VOLUME SOLIDS
%55 ± 3
THEORETICAL COVERAGE
7,3 m²/L (75 µm DFT)
THINNING
Gen Epoxy Thinner
APPLICATION METHOD
Airless spray, brush, roller
SURFACE PREPARATION
Sa 2½ (ISO 8501-1)
NUMBER OF COATS
1–2 coats (75–100 µm DFT)
COMPATIBLE PRODUCTS
623, 776
COVERAGE
—
DRYING
—
PACKAGING
—
COLOUR
—
TECHNICAL DOCUMENTS
Use and Application
AREAS OF USE
Above-water areas of vessels, decks and topsides; piers, ports, seaside and offshore structures.
SURFACE PREPARATION AND APPLICATION
Blast steel to ISO 8501-1 Sa 2½ (roughness 40–75 µm) and remove salts, grease and dust. St 3 power-tool cleaning may be used for local repairs. Mix A and B mechanically until homogeneous; apply by airless spray, brush or roller. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
SUITABLE SHIP AREAS
→ Offshore and Port Structures
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
KEY FEATURES
— Excellent water resistance
— Long-term protection in corrosive environments
— Compatible with epoxy and polyurethane topcoats
— Ideal for above-water areas
SYSTEM RECOMMENDATION
SUBSEQUENT COATS
623 Genepox Finish Marine or 776 Genpoly ACR Topcoat Marin