Gen Marine / Primers and Anti-corrosive Systems / 605 Genepox Fast Primer
PRIMERS AND ANTI-CORROSIVE SYSTEMS · PRIMER / TOPCOAT
605
Genepox Fast Primer
2K · Fast drying · On-board maintenance
Multi-purpose, surface-tolerant, fast-drying primer/topcoat compatible with all topcoats; ideal for on-board maintenance.
A multi-purpose, surface-tolerant primer/topcoat. As all topcoats can be applied over it, it is an ideal on-board primer. Its fast drying allows maintenance at sea and during short port stays.
Technical Data
BINDER
Modified epoxy
COMPONENTS
Two-component (2K)
POSITION IN SYSTEM
Primer / topcoat
DENSITY
1,45 ± 0,1 kg/L
VOLUME SOLIDS
%65 ± 3
THEORETICAL COVERAGE
6,5 m²/L (100 µm DFT)
THINNING
Gen Epoxy Thinner
APPLICATION METHOD
Airless spray, brush, roller
SURFACE PREPARATION
St 2–St 3 or Sa 2
NUMBER OF COATS
1–2 coats
COMPATIBLE PRODUCTS
623, 769, 776
COVERAGE
—
DRYING
—
PACKAGING
—
COLOUR
—
TECHNICAL DOCUMENTS
Use and Application
AREAS OF USE
Decks, holds, hatch covers and other steel structures requiring fast drying; submerged areas, accommodation and ballast tanks; sound aged coatings of various types.
SURFACE PREPARATION AND APPLICATION
Remove salts, grease and loose rust; clean to St 2–St 3 or blast to Sa 2. Abrade sound old coatings. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
SUITABLE SHIP AREAS
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
KEY FEATURES
— Fast drying, short maintenance time
— Surface tolerant
— Compatible with all topcoats
— Use as primer or topcoat
SYSTEM RECOMMENDATION
SUBSEQUENT COATS
623 Genepox Finish Marine, 776 Genpoly ACR Topcoat Marin or 769 Genacryl Finish