Gen Marine / Primers and Anti-corrosive Systems / 609 Genepox Tiecoat Primer
PRIMERS AND ANTI-CORROSIVE SYSTEMS · TIE COAT
609
Genepox Tiecoat Primer
2K · Modified epoxy · Under antifouling
Anti-corrosive modified epoxy primer acting as an adhesion bridge for the antifouling applied over it.
An anti-corrosive epoxy primer based on modified epoxy resin and special pigments. Besides film hardness and corrosion resistance, it especially improves the adhesion of the antifouling applied over it.
Technical Data
BINDER
Modified epoxy
COMPONENTS
Two-component (2K)
POSITION IN SYSTEM
Tie coat
DENSITY
1,35 ± 0,1 kg/L
VOLUME SOLIDS
%50 ± 3
THEORETICAL COVERAGE
6,7 m²/L (75 µm DFT)
THINNING
Gen Epoxy Thinner
APPLICATION METHOD
Airless spray, brush, roller
SURFACE PREPARATION
Clean, dry epoxy primer
NUMBER OF COATS
1 coat (75 µm DFT)
COMPATIBLE PRODUCTS
603, 651
COVERAGE
—
DRYING
—
PACKAGING
—
COLOUR
—
TECHNICAL DOCUMENTS
Use and Application
AREAS OF USE
Adhesion bridge under antifouling on maintenance and repair vessels; outer hull, deck and accommodation.
SURFACE PREPARATION AND APPLICATION
Apply over the epoxy primer within its overcoating interval. On aged systems wash the surface, remove loose paint and roughen. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
SUITABLE SHIP AREAS
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
KEY FEATURES
— Adhesion bridge for antifouling
— Corrosion resistance
— Hard, durable film
— Suitable for maintenance and repair
SYSTEM RECOMMENDATION
PRIMER
603 Genepox Zinc Rich Primer or 651 Gencoat Marin
SUBSEQUENT COATS
Antifouling topcoat