Gen Marine / Intermediates and Topcoats / 620 Genepox Topcoat
INTERMEDIATES AND TOPCOATS · TOPCOAT
620
Genepox Topcoat
2K · Epoxy · Chemical resistance
Two-component epoxy topcoat cured with polyamide, resistant to water, seawater, chemicals and abrasion.
A two-component, reaction-curing epoxy topcoat cured with a polyamide hardener. It performs very well in general industry, machinery, metal protection and marine applications.
Technical Data
BINDER
Epoxy-polyamide
COMPONENTS
Two-component (2K)
POSITION IN SYSTEM
Topcoat
DENSITY
1,35 ± 0,1 kg/L
VOLUME SOLIDS
%55 ± 3
THEORETICAL COVERAGE
9 m²/kg (single coat)
MIXING RATIO
By weight 4 : 1 (A : B)
THINNING
016 Gen Epoxy Thinner
APPLICATION METHOD
Brush, roller, airless sprey
COMPATIBLE PRODUCTS
601
COVERAGE
—
COVERAGE
—
DRYING
—
PACKAGING
3 kg set (2,4 kg A + 0,6 kg B) · 20 kg set (16 kg A + 4 kg B)
COLOUR
RAL renk kartelasındaki renklerde, talep üzerine üretilir.
TECHNICAL DOCUMENTS
Use and Application
AREAS OF USE
All metal and mineral surfaces exposed to water, seawater, chemicals and abrasion; holds, engine rooms and interiors; epoxy topcoat in marine applications.
SURFACE PREPARATION AND APPLICATION
Apply over a clean, dry epoxy primer within its overcoating interval. Mix A and B and apply by airless spray, brush or roller. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
SUITABLE SHIP AREAS
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
KEY FEATURES
— Water and seawater resistance
— Chemical and abrasion resistance
— Hard, durable film
— For metal and mineral surfaces
SYSTEM RECOMMENDATION
PRIMER
601 Genepox Primer