Aqualastic Dry Insulation Material
It is a solvent-free, ready-to-use white colored waterproofing material used in waterproofing under ceramics and under paint and coating on exterior facades in interior and exterior spaces of all buildings, especially in wet areas such as balconies, bathrooms, kitchens, car wash areas, toilets, shower cabins.
It is a water impermeability product that has the TS EN 14891:2012 standard, TSE and CE certificates, is applied in liquid form based on normal dispersion, has crack bridging properties at low temperatures and is resistant to contact with chlorinated water.
Surface Preparation and Application Method
Dust, dirt, mold oil, slag, paint and similar foreign substances that prevent adhesion, residues and wastes such as cement, plaster and concrete should be cleaned from the application surface. Sub-surfaces that are not strong enough to support themselves such as cracked plasters, weak surfaces or moss residues should be cleaned from the surface. The application surface should be absolutely crack-free and solid. Corners should be rounded. The surface should be dry before application. The surface prepared for application should be primed with Gen Aqualastic Dry (1:1). The material should be mixed with a mixer at low speed and made ready for use. Application should be done with a brush in at least a primer coat + 2 coats. Textile should be used for reinforcement purposes to ensure minimum application thickness on horizontal surfaces.
Dilution / Mixing Ratio
It is ready to use.
Paintable (Coatable) Area
Approximately 1.5 kg / m² for every 1 mm thickness. Consumption amounts are theoretical values, we recommend a consumption-controlled sample application before application.
Drying Time
Complete Drying Time: Min. 48 Hours. Waiting Time Between Coats: Min. 12 Hours.
Recommended Application Appliances
Roller and brush
PACKAGING
3kg - 10kg - 20kg
