Genfloor Liquid Glass
It is a two-component product that has excellent adhesion to surfaces such as glass, mosaic, tile, porcelain, ceramic, marble, granite, natural stone, wood, concrete, screed, galvanized sheet, aluminum, etc., is produced as transparent with high resistance to atmospheric conditions, has excellent water resistance, as well as high chemical and physical resistance, and is used in waterproofing and also for decorative purposes.
Surface Preparation and Application Method
The relative humidity of the air should be at most 80%, the ambient temperature should be 15 - 35°C and the surface temperature to be applied should be at least 5°C. It should not be applied outdoors in rainy weather. The surface should be cleaned very well for a good adhesion. All kinds of oil, dust, dirt, rust and similar substances that may prevent the liquid glass from adhering to the surface between the liquid glass and the ground on the surfaces to be applied should be completely cleaned. In tile and ceramic applications, existing joint fillers should be renewed if they are worn. A sanded surface provides better mechanical properties for the liquid glass application and helps the liquid glass to adhere better to the surface.
Dilution / Mixing Ratio
It is ready to use.
Paintable (Coatable) Area
10 - 13 m²/2 kg set, 20 - 26 m²/4 kg set
Drying Time
At 20°C, it completes dust-proof drying in 20-30 minutes, touch-drying in 2-3 hours, and hard-drying in 24 hours. It completes chemical drying in 7 days.
Recommended Application Appliances
Brush, roller or airless spray
PACKAGING
4kg
