top of page
genpool-min.png
Gene Pool Paint

It is a polyurethane resin based, two-component, ready-to-use, elastic pool paint that can be easily applied to all types of surfaces and is resistant to water and water pressure.

Surface Preparation and Application Method

The surface must be clean, dry and free from foreign substances such as dirt, oil, coating, surface curing materials. Surface repairs and filling of gaps and holes must be done with Repair Mortar. It must be applied with a brush, roller or a suitable sprayer and left to dry. The second layer must be applied within 24 hours after the first layer has dried. The prepared mixture must be consumed within 5-6 hours. After the application, the pool must be left to cure completely for 10 days before being filled with water.

Dilution / Mixing Ratio

It is 7/1.

Paintable (Coatable) Area

1 m² /set (two coat application)

Drying Time

The pot life is 30 minutes, the drying time is 24 hours and the full cure time is 10 days.

Recommended Application Appliances

Brush, roller or suitable sprayer

PACKAGING

Packaging 16 kg set (A Component: 14 kg tin can (Paint) + B component: 2 kg tin can (hardener)

bottom of page