top of page
Gen Rapid Paint
Rapid alkyd resin based, air drying, extra glossy top coat paint.
Surface Preparation and Application Method
The application surfaces should be cleaned of any substance that will reduce adhesion. Metal surfaces should be ideally sandblasted to at least Sa2 ½ and primed with industrial primer or rapid primer within 6 hours. After the primer has dried (after 2 hours), the final coat is applied. The surface temperature should be at least 10°C. Application should not be done on surfaces around the dew point or on wet or damp surfaces.
Dilution / Mixing Ratio
It should be applied in at least 2 coats by diluting with max. 20% industrial thinner.
Intensity
1.30 ± 0.1
Solid Volume
50±3
Recommended Application Appliances
Airless gun or pistol
PACKAGING
1kg - 3kg - 15kg
bottom of page