top of page
wood ache mck.png
Gen Water Based Wood Putty

It has high filling power. It dries quickly and can be easily sanded. It creates a solid sub-base on the surfaces it is applied to.

Surface Preparation and Application Method

Surfaces must be cleaned of dirt, dust, oil, old paint and varnish residues. After application, they should be sanded with fine sandpaper.

Dilution / Mixing Ratio

It is ready to use.

Paintable (Coatable) Area

Varies depending on the applied surface. Approximately 700-1000 gr/m² in a single coat.

Drying Time

It completes its drying in 4 hours at 23°C and 50% relative humidity.

Recommended Application Appliances

Trowel and spatula

PACKAGING

0,600 Kg - 1,350 Kg - 4 Kg - 25 Kg

bottom of page