Gen Industrial / Polyurethane and Acrylic Topcoats / 791 Genpur Topcoat
POLYURETHANE AND ACRYLIC TOPCOATS · TOPCOAT
791
Genpur Topcoat
2K · Polyurethane alkyd · Gloss
Two-component, isocyanate-modified polyurethane alkyd gloss topcoat.
A two-component, isocyanate-modified gloss topcoat based on polyurethane alkyd. It combines the easy application of alkyd systems with the durability of polyurethane.
Technical Data
BINDER
Polyurethane alkyd / isocyanate
COMPONENTS
Two-component (2K)
POSITION IN SYSTEM
Topcoat
DENSITY
1.20 ± 0.1 kg/L
VOLUME SOLIDS
50% ± 3
GLOSS / APPEARANCE
Gloss
THINNING
018 Gen Polyurethane Thinner
APPLICATION METHOD
Brush, roller, air and airless spray
COVERAGE
—
COVERAGE
—
COVERAGE
—
COVERAGE
—
DRYING
—
PACKAGING
—
COLOUR
Produced on request in colours from the RAL colour chart.
TECHNICAL DOCUMENTS
Use and Application
AREAS OF USE
Used as a topcoat on exterior steel surfaces, machinery, tanks, commercial vehicles, shipyards, ports and piers.
SURFACE PREPARATION AND APPLICATION
The surface must be clean and dry, and free from oil, grease, dust, rust, salts and any contamination that could reduce adhesion. Apply over a surface primed with a suitable primer. Stir components A and B separately, combine them at the specified ratio and mix with a mechanical mixer until homogeneous. Surface temperature must be at least 3 °C above the dew point; do not apply on wet or damp surfaces.
INDUSTRIES SERVED
→ Steel Structures and Structural Steel
→ Vehicle-Mounted Equipment, Trailers and Bodies
→ Ports, Shipyards and Coastal Structures
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
KEY FEATURES
— Gloss, durable topcoat
— Resistance to outdoor conditions
— Easy application
— Wide range of uses: machinery, tanks, commercial vehicles
SYSTEM RECOMMENDATION
PRIMER
601 Genepox Primer