top of page

Construction / Primers & Surface Preparation / 154 Concrete Contact Primer

Gen Boya 154 Brüt Beton Astarı ambalaj görseli

PRODUCT CODE

154

Concrete Contact Primer

Water-based · Bonding agent

Special primer that increases the adhesion of coatings applied on raw concrete surfaces.

A special primer that increases the adhesion of plasters and similar coatings applied to very hard, smooth surfaces with low bonding capacity, such as raw concrete.

Technical Specifications

COVERAGE

7 m²/kg (single coat; depends on surface absorption)

THINNING

10–30% water

WAITING TIME BETWEEN COATS

​

FULL DRYING

Min. 24 hours

APPLICATION TOOLS

Exterior roller or brush

NUMBER OF COATS

Single coat

PACKAGING

3.5 kg · 12 kg · 20 kg

COLOUR

​

TECHNICAL DOCUMENTS

Surface Preparation and Application

Any oil, grease, rust and paraffin residues that would weaken adhesion must be removed from the surface, and no loose particles may remain. Thin with water to the desired consistency and stir for 3–5 minutes to obtain a homogeneous, lump-free mix, then apply a single coat to the prepared surface. The product must be stirred at regular intervals during application.

RECOMMENDED PRIMER

​

KEY FEATURES

​

Gen Boya Yapı products are available at our authorised dealers.

Find the nearest of our 2,000+ dealers and points of sale across Türkiye, or join the Gen Boya dealer network.

bottom of page