top of page

Genfloor / Hygienic Wall Coatings / 670 Genfloor Topcoat Wall SF

Gen Boya 670 Genfloor Topcoat Wall SF ambalaj görseli

HYGIENIC WALL COATINGS · WALL AND SURFACE TOPCOAT

670

Genfloor Topcoat Wall SF

2K · Solvent-free epoxy · Cycloaliphatic

Solvent-free, hygienic epoxy wall and surface coating cured with cycloaliphatic polyamine.

A two-component, solvent-free coating based on epoxy resin and cured with a cycloaliphatic polyamine. Its odourless nature allows safe application in facilities that remain in operation.

Technical Data

BINDER

Epoxy / cycloaliphatic polyamine

COMPONENTS

Two-component (2K)

POSITION IN SYSTEM

Wall and surface topcoat

DENSITY

1.55 ± 0.1 kg/L

VOLUME SOLIDS

Solvent-free (~100%)

THINNING

Do not thin

APPLICATION METHOD

Roller, brush

COVERAGE

—

COVERAGE

—

COVERAGE

—

COVERAGE

—

COVERAGE

—

DRYING

—

PACKAGING

—

COLOUR

Produced on request in colours from the RAL colour chart.

TECHNICAL DOCUMENTS

Use and Application

AREAS OF USE

Can be applied in factories, warehouses, shopping centres, workshops, aircraft hangars, schools, hospitals, the pharmaceutical and food sectors, laboratories, car parks, treatment plants and areas where corrosive chemicals are used.

 

SURFACE PREPARATION AND APPLICATION

The surface must be sound, clean and dry. Prime the surface with 640 Genfloor Primer. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply by roller or brush. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.

 

APPLICATION AREAS

→ Food and Beverage Plants

→ Pharmaceutical, Hospital and Laboratory

 

Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.

KEY FEATURES

— Solvent-free, low odour

— High chemical resistance with cycloaliphatic cure

— Hygienic, washable surface

— For vertical and horizontal surfaces

SYSTEM RECOMMENDATION

PRIMER

640 Genfloor Primer

The right system for your floor, with the Genfloor technical team.

Our experts support you at every stage of your project with floor analysis, moisture measurement, system selection and consumption calculation.

bottom of page