Genfloor / Hygienic Wall Coatings / 672 Genfloor Topcoat Chem Wall
HYGIENIC WALL COATINGS · CHEMICAL-RESISTANT WALL TOPCOAT
672
Genfloor Topcoat Chem Wall
2K · Solvent-free epoxy · Chemical resistance
Solvent-free epoxy topcoat for vertical surfaces exposed to chemicals.
A two-component, solvent-free epoxy topcoat developed for vertical surfaces and resistant to chemicals.
Technical Data
BINDER
Epoxy resin
COMPONENTS
Two-component (2K)
POSITION IN SYSTEM
Chemical-resistant wall topcoat
DENSITY
1.55 ± 0.1 kg/L
VOLUME SOLIDS
Solvent-free (~100%)
THINNING
Do not thin
APPLICATION METHOD
Roller, brush
COVERAGE
—
COVERAGE
—
COVERAGE
—
COVERAGE
—
COVERAGE
—
DRYING
—
PACKAGING
—
COLOUR
Produced on request in colours from the RAL colour chart.
TECHNICAL DOCUMENTS
Use and Application
AREAS OF USE
Used as a topcoat on ceramic walls, in laboratories, hospitals, food plants, swimming pools and water tanks, toilets and on vertical surfaces of industrial facilities exposed to chemicals.
SURFACE PREPARATION AND APPLICATION
The surface must be sound, clean and dry; use 641 Ceramic Surface Primer on ceramic tiles. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply by roller or brush. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
APPLICATION AREAS
→ Pharmaceutical, Hospital and Laboratory
→ Chemical, Petrochemical and Treatment
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
KEY FEATURES
— Chemical resistance on vertical surfaces
— Solvent-free
— Hygienic, non-porous surface
— Can be applied over ceramic tiles (with 641)
SYSTEM RECOMMENDATION
PRIMER
640 Genfloor Primer or 641 Ceramic Surface Primer