Genfloor / Acrylic Floor and Road Marking / 842 Gen Floor Paint
ACRYLIC FLOOR AND ROAD MARKING · TOPCOAT
842
Gen Floor Paint
1K · Acrylic / MMA · Floor paint
Fast-drying, single-component acrylic floor paint for concrete and asphalt.
A single-component, solvent-borne, air-curing decorative and protective floor paint made of acrylic oligomer and MMA monomer, suitable for concrete and asphalt surfaces.
Technical Data
BINDER
Acrylic oligomer / MMA
COMPONENTS
Single-component (1K)
POSITION IN SYSTEM
Topcoat
DENSITY
1.25 ± 0.1 kg/L
VOLUME SOLIDS
50% ± 5
THEORETICAL COVERAGE
5 m²/kg (single coat)
THINNING
Do not thin; ready to use
APPLICATION METHOD
Roller, brush
NUMBER OF COATS
2 coats
COVERAGE
—
COVERAGE
—
COVERAGE
—
DRYING
Touch dry 7 h · Recoat 24 h · Fully dry 24 h
PACKAGING
18 kg
COLOUR
Stock colours: RAL 5015 Blue, RAL 7040 Grey, RAL 1003 Yellow, RAL 3020 Red, RAL 6024 Green, RAL 9003 White, RAL 9005 Black
TECHNICAL DOCUMENTS
Use and Application
AREAS OF USE
Used on cycle paths, areas with light pedestrian traffic, warehouses, walkways, shop and office floors and all areas where fast drying is expected.
SURFACE PREPARATION AND APPLICATION
Remove dust, dirt and oil; scrape off old paint residues and repair cracks with repair mortar. The surface must be completely dry. Stir the product thoroughly and apply two coats by roller or brush, allowing 24 hours between coats. Application temperature must be between +5 °C and +30 °C.
APPLICATION AREAS
→ Shopping Centres, Retail, Schools and Offices
→ Roads, Cycle Paths and Walkways
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
KEY FEATURES
— Single-component, ready to use
— Suitable for concrete and asphalt
— Fast drying
— 7 stock colours
SYSTEM RECOMMENDATION
PRIMER
841 Gen Floor Paint Primer
SUBSEQUENT COATS
843 Gen Floor Paint Protective Varnish