Gen Industrial / Epoxy Primers / 604 Genepox Wash Primer

EPOXY PRIMERS · ADHESION (WASH) PRIMER
604
Genepox Wash Primer
2K · Polyvinyl butyral · Adhesion primer
Two-component polyvinyl butyral adhesion primer for galvanised steel, aluminium and steel.
A two-component, reaction-curing primer based on polyvinyl butyral (PVB) modified resin with anticorrosive pigments. It improves the adhesion of the subsequent paint system on difficult substrates, particularly non-ferrous metals.
Technical Data
LIGANTE
Polyvinyl butyral (PVB) modified resin
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Adhesion (wash) primer
DENSIDAD
0.98 ± 0.05 kg/L
SÓLIDOS EN VOLUMEN
25% ± 3
MÉTODO DE APLICACIÓN
Brush, air-assisted (airmix) and airless spray
PREPARACIÓN DE SUPERFICIE
Clean, grease-free, dry surface
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
SECADO
—
ENVASE
15 kg kit (A+B)
COLOR
—
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Used on steel, aluminium and galvanised surfaces for corrosion protection and to improve the adhesion of subsequent topcoats.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
Before application, remove dust, rust, oil and other contaminants and correct all surface defects. Prime within 1–2 hours of completing surface preparation. Stir components A and B separately, combine them at the specified ratio and mix with a mechanical mixer until homogeneous. Surface temperature must be at least 3 °C above the dew point; do not apply on wet or damp surfaces. Apply as a thin, even film.
SECTORES DE USO
→ Vehicle-Mounted Equipment, Trailers and Bodies
→ Outdoor Advertising and Signage
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
CARACTERÍSTICAS PRINCIPALES
— Superior adhesion to galvanised steel and aluminium
— Effective corrosion protection in a thin film
— Adhesion bridge for subsequent coats
— Fast reaction drying
SISTEMA RECOMENDADO
CAPAS SIGUIENTES
Complete the system with 601 Genepox Primer, 620 Genepox Topcoat or 774 Genacryl Topcoat.
