Gen Industrial / Epoxy Intermediate and Topcoats / 620 Genepox Topcoat
EPOXY INTERMEDIATE AND TOPCOATS · TOPCOAT
620
Genepox Topcoat
2K · Epoxy polyamide · Topcoat
Two-component, solvent-borne epoxy topcoat cured with a polyamide hardener.
A two-component, reaction-curing epoxy topcoat based on epoxy resin and cured with a polyamide hardener. It forms a hard film resistant to abrasion and chemicals.
Technical Data
LIGANTE
Epoxy resin / polyamide hardener
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Topcoat
DENSIDAD
1.35 ± 0.1 kg/L
SÓLIDOS EN VOLUMEN
55% ± 3
RENDIMIENTO TEÓRICO
9 m²/kg (single coat)
PROPORCIÓN DE MEZCLA
4 : 1 by weight (A : B)
DILUCIÓN
016 Gen Epoxy Thinner
MÉTODO DE APLICACIÓN
Brush, roller, airless spray
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
SECADO
—
ENVASE
3 kg kit (2.4 kg A + 0.6 kg B) · 20 kg kit (16 kg A + 4 kg B)
COLOR
Produced on request in colours from the RAL colour chart.
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Used on all kinds of wood, metal and mineral surfaces; performs very well in general industry, machinery manufacturing, metal protection and marine applications.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
The substrate must be sound, clean and dry. Scrape and thoroughly clean dirty, dusty, blistered and previously painted surfaces; remove any oil, grease, rust and paraffin residues that could weaken adhesion. Stir components A and B separately, combine them at the specified ratio and mix with a mechanical mixer until homogeneous. Surface temperature must be at least 3 °C above the dew point; do not apply on wet or damp surfaces. Epoxy topcoats may chalk when exposed to UV; a polyurethane topcoat is recommended outdoors where colour retention is required.
SECTORES DE USO
→ Machinery and Equipment Manufacturing
→ Energy: Wind, Transformers and Electric Motors
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
CARACTERÍSTICAS PRINCIPALES
— High abrasion and chemical resistance
— Hard, durable film
— For metal, wood and mineral surfaces
— Fully compatible system with epoxy primers
SISTEMA RECOMENDADO
IMPRIMACIÓN
601 Genepox Primer