Genfloor / Waterproofing and Pools / 348 Genfloor Guard
WATERPROOFING AND POOLS · PROTECTIVE IMPREGNATION
348
Genfloor Guard
1K · Hydrophobic · Impregnation
Colourless, reactive hydrophobic impregnation protecting concrete and natural stone against water and oil.
A single-component, low-viscosity, colourless, reactive water- and oil-repellent impregnation. As a hydrophobic solution with a very small molecular structure, it penetrates into the pores without changing the appearance of the surface.
Technical Data
LIGANTE
Reactive hydrophobic solution
COMPONENTES
Single-component (1K)
POSICIÓN EN EL SISTEMA
Protective impregnation
DENSIDAD
0.85 ± 0.05 kg/L
SÓLIDOS EN VOLUMEN
25% ± 5
DILUCIÓN
Do not thin
MÉTODO DE APLICACIÓN
Brush, roller, low-pressure spray
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
SECADO
—
ENVASE
—
COLOR
Colourless
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Used on concrete port and pier piles, bridges and viaducts, concrete beneath asphalt roads, concrete and stone pavements, blocks, roof tiles and dams.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
The surface must be clean, dry and sound. Apply the product unmixed by brush, roller or low-pressure spray until the surface is saturated. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
ÁREAS DE APLICACIÓN
→ Outdoor Areas, Terraces and Roofs
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
CARACTERÍSTICAS PRINCIPALES
— Water and oil repellent
— Does not change the surface appearance
— Small molecular structure for deep penetration
— Breathable surface
SISTEMA RECOMENDADO
—