Genfloor / Acrylic Floor and Road Marking / 624 Genfloor Road
ACRYLIC FLOOR AND ROAD MARKING · MARKING PAINT
624
Genfloor Road
2K · Solvent-borne epoxy · Line marking
High-adhesion epoxy line-marking paint for lanes and markings on industrial floors.
A two-component, solvent-borne, epoxy-based line-marking paint with high adhesion and mechanical strength.
Technical Data
LIGANTE
Epoxy resin
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Marking paint
DENSIDAD
1.65 ± 0.1 kg/L
SÓLIDOS EN VOLUMEN
50% ± 3
DILUCIÓN
016 Gen Epoxy Thinner
MÉTODO DE APLICACIÓN
Brush, roller
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
SECADO
—
ENVASE
—
COLOR
White, yellow and RAL colours on request
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Used for marking lanes and special signs in factories, assembly workshops, warehouses, aircraft hangars, car parks, cycle paths and on all industrial floors.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
The surface must be clean and dry; mark out the line edges with masking tape. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply by brush or roller. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
ÁREAS DE APLICACIÓN
→ Factories and Production Plants
→ Warehouses and Logistics Centres
→ Roads, Cycle Paths and Walkways
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
CARACTERÍSTICAS PRINCIPALES
— High adhesion
— Lines resistant to forklift traffic
— Compatible with epoxy floors
— Sharp, durable marking
SISTEMA RECOMENDADO
—