Genfloor / Hygienic Wall Coatings / 626 Genfloor Topcoat Wall
HYGIENIC WALL COATINGS · WALL TOPCOAT
626
Genfloor Topcoat Wall
2K · Solvent-borne epoxy · Wall
Solvent-borne epoxy topcoat for industrial vertical concrete walls.
A two-component topcoat based on solvent-borne epoxy resin. It forms a washable, chemical-resistant and hygienic wall coating on vertical concrete surfaces.
Technical Data
LIGANTE
Epoxy resin
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Wall topcoat
DENSIDAD
1.60 ± 0.1 kg/L
SÓLIDOS EN VOLUMEN
55% ± 3
DILUCIÓN
016 Gen Epoxy Thinner
MÉTODO DE APLICACIÓN
Roller, brush, airless spray
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
SECADO
—
ENVASE
—
COLOR
Produced on request in colours from the RAL colour chart.
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Used in factories, assembly workshops, warehouses, aircraft hangars, shops and car parks, food plants, hospitals, the chemical and pharmaceutical industries, power plants and on all industrial vertical concrete walls.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
The wall surface must be sound, clean and dry; remove dust, oil and loose parts. Prime the surface with 643 Genfloor Primer Impregnation SB. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply two coats by roller, brush or airless spray. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
CARACTERÍSTICAS PRINCIPALES
— Formulated for vertical surfaces
— Washable, hygienic surface
— Chemical resistance
— Economical roller application
SISTEMA RECOMENDADO
IMPRIMACIÓN
643 Genfloor Primer Impregnation SB