Genfloor / Self-Levelling Systems / 662 Genfloor Textured Epoxy
SELF-LEVELLING SYSTEMS · TEXTURED TOPCOAT
662
Genfloor Textured Epoxy
2K · Solvent-free epoxy · Orange-peel finish
Solvent-free epoxy topcoat with an orange-peel finish for slip resistance.
A two-component, solvent-free epoxy topcoat giving an orange-peel finish. Its textured surface reduces the risk of slipping while offering high surface hardness, water and chemical resistance and easy cleaning.
Technical Data
LIGANTE
Epoxy resin
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Textured topcoat
DENSIDAD
1.80 ± 0.1 kg/L
SÓLIDOS EN VOLUMEN
Solvent-free (~100%)
BRILLO / ASPECTO
Orange-peel (textured) finish
RENDIMIENTO TEÓRICO
400 g/m² (200–225 µm dry film)
PROPORCIÓN DE MEZCLA
9 : 1 by weight (A : B)
DILUCIÓN
Do not thin
MÉTODO DE APLICACIÓN
Roller, brush
PREPARACIÓN DE SUPERFICIE
Milling / shot-blasting, moisture < 4%
RENDIMIENTO
—
SECADO
Dust dry 6–8 h · Touch dry 24 h · Full cure 7 days
ENVASE
20 kg kit (18 kg A + 2 kg B)
COLOR
Produced on request in colours from the RAL colour chart.
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Used where mechanical resistance is required: production and storage areas with forklift traffic, loading ramps, supermarkets, multi-storey and underground car parks, exhibition halls.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
New concrete must be cured for at least 28 days; surface moisture must not exceed 4%. Remove weak surface layers, laitance, oil, curing compounds and old coating residues by milling, shot-blasting or diamond grinding; remove the dust with an industrial vacuum. Repair cracks and holes with epoxy repair mortar. Prime the surface with 640 Genfloor Primer; repair cracks and pits with epoxy filler. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply by brush or roller. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
ÁREAS DE APLICACIÓN
→ Warehouses and Logistics Centres
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
CARACTERÍSTICAS PRINCIPALES
— Textured (orange-peel) surface, slip resistance
— High surface hardness
— Water and chemical resistance
— Easy to clean
SISTEMA RECOMENDADO
IMPRIMACIÓN
640 Genfloor Primer