Genfloor / Special Performance Systems / 664 Genfloor Antistatic Coating
SPECIAL PERFORMANCE SYSTEMS · ANTISTATIC TOPCOAT
664
Genfloor Antistatic Coating
2K · Solvent-free epoxy · Antistatic
Solvent-free antistatic epoxy topcoat for areas with explosion risk and sensitive electronics.
A two-component, solvent-free, epoxy-based topcoat forming the wearing layer of the antistatic epoxy floor system. It conducts static charges to earth in a controlled way.
Technical Data
LIGANTE
Epoxy resin
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Antistatic topcoat
DENSIDAD
1.60 ± 0.1 kg/L
SÓLIDOS EN VOLUMEN
Solvent-free (~100%)
DILUCIÓN
Do not thin
MÉTODO DE APLICACIÓN
Notched trowel, squeegee, spiked roller
PREPARACIÓN DE SUPERFICIE
Milling / shot-blasting, moisture < 4%
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
SECADO
—
ENVASE
—
COLOR
Produced on request in colours from the RAL colour chart.
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Used on industrial floors, in hospitals, operating theatres, laboratories, production and storage areas, and in areas with sensitive electrical and electronic equipment and explosion risk.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
The system is applied over 640 Genfloor Primer and 647 Conductive Primer. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Spread with a squeegee and notched trowel and de-aerate with a spiked roller. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
ÁREAS DE APLICACIÓN
→ Pharmaceutical, Hospital and Laboratory
→ Aircraft Hangars and Defence Industry
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
CARACTERÍSTICAS PRINCIPALES
— Controlled dissipation of static electricity
— Safety in areas with explosion risk
— Seamless, hygienic surface
— Solvent-free
SISTEMA RECOMENDADO
IMPRIMACIÓN
640 Genfloor Primer + 647 Conductive Concrete Primer