Genfloor / Hygienic Wall Coatings / 670 Genfloor Topcoat Wall SF
HYGIENIC WALL COATINGS · WALL AND SURFACE TOPCOAT
670
Genfloor Topcoat Wall SF
2K · Solvent-free epoxy · Cycloaliphatic
Solvent-free, hygienic epoxy wall and surface coating cured with cycloaliphatic polyamine.
A two-component, solvent-free coating based on epoxy resin and cured with a cycloaliphatic polyamine. Its odourless nature allows safe application in facilities that remain in operation.
Technical Data
LIGANTE
Epoxy / cycloaliphatic polyamine
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Wall and surface topcoat
DENSIDAD
1.55 ± 0.1 kg/L
SÓLIDOS EN VOLUMEN
Solvent-free (~100%)
DILUCIÓN
Do not thin
MÉTODO DE APLICACIÓN
Roller, brush
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
SECADO
—
ENVASE
—
COLOR
Produced on request in colours from the RAL colour chart.
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Can be applied in factories, warehouses, shopping centres, workshops, aircraft hangars, schools, hospitals, the pharmaceutical and food sectors, laboratories, car parks, treatment plants and areas where corrosive chemicals are used.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
The surface must be sound, clean and dry. Prime the surface with 640 Genfloor Primer. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply by roller or brush. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
ÁREAS DE APLICACIÓN
→ Pharmaceutical, Hospital and Laboratory
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
CARACTERÍSTICAS PRINCIPALES
— Solvent-free, low odour
— High chemical resistance with cycloaliphatic cure
— Hygienic, washable surface
— For vertical and horizontal surfaces
SISTEMA RECOMENDADO
IMPRIMACIÓN
640 Genfloor Primer