Genfloor / Hygienic Wall Coatings / 672 Genfloor Topcoat Chem Wall
HYGIENIC WALL COATINGS · CHEMICAL-RESISTANT WALL TOPCOAT
672
Genfloor Topcoat Chem Wall
2K · Solvent-free epoxy · Chemical resistance
Solvent-free epoxy topcoat for vertical surfaces exposed to chemicals.
A two-component, solvent-free epoxy topcoat developed for vertical surfaces and resistant to chemicals.
Technical Data
LIGANTE
Epoxy resin
COMPONENTES
Two-component (2K)
POSICIÓN EN EL SISTEMA
Chemical-resistant wall topcoat
DENSIDAD
1.55 ± 0.1 kg/L
SÓLIDOS EN VOLUMEN
Solvent-free (~100%)
DILUCIÓN
Do not thin
MÉTODO DE APLICACIÓN
Roller, brush
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
SECADO
—
ENVASE
—
COLOR
Produced on request in colours from the RAL colour chart.
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Used as a topcoat on ceramic walls, in laboratories, hospitals, food plants, swimming pools and water tanks, toilets and on vertical surfaces of industrial facilities exposed to chemicals.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
The surface must be sound, clean and dry; use 641 Ceramic Surface Primer on ceramic tiles. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply by roller or brush. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.
ÁREAS DE APLICACIÓN
→ Pharmaceutical, Hospital and Laboratory
→ Chemical, Petrochemical and Treatment
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
CARACTERÍSTICAS PRINCIPALES
— Chemical resistance on vertical surfaces
— Solvent-free
— Hygienic, non-porous surface
— Can be applied over ceramic tiles (with 641)
SISTEMA RECOMENDADO
IMPRIMACIÓN
640 Genfloor Primer or 641 Ceramic Surface Primer