top of page

Genfloor / Polyurethane Systems / 834 Genfloor Polyurethane Floor Topcoat

Gen Boya 834 Genfloor Poliüretan Zemin Kaplama Topcoat ambalaj görseli

POLYURETHANE SYSTEMS · UV-PROTECTIVE TOPCOAT

834

Genfloor Polyurethane Floor Topcoat

2K · Polyurethane · UV resistance

Polyurethane protective topcoat for floors requiring UV resistance outdoors.

A ready-to-use, two-component, polyurethane-based protective topcoat with high UV resistance. It provides colour and gloss retention over epoxy floor systems.

Technical Data

LIGANTE

Polyurethane

COMPONENTES

Two-component (2K)

POSICIÓN EN EL SISTEMA

UV-protective topcoat

DENSIDAD

1.30 ± 0.1 kg/L

SÓLIDOS EN VOLUMEN

60% ± 5

RENDIMIENTO TEÓRICO

4 m²/kg (single coat)

PROPORCIÓN DE MEZCLA

4 : 1 by weight (A : B)

DILUCIÓN

018 Gen Polyurethane Thinner

MÉTODO DE APLICACIÓN

Roller, brush

RENDIMIENTO

—

RENDIMIENTO

—

RENDIMIENTO

—

SECADO

—

ENVASE

15 kg kit (12 kg A + 3 kg B)

COLOR

Produced on request in colours from the RAL colour chart.

DOCUMENTOS TÉCNICOS

Uso y aplicación

USOS

Used as a protective coat on all kinds of metal surfaces and as a topcoat on epoxy floor coatings, particularly outdoors where UV resistance is required.

 

PREPARACIÓN DE SUPERFICIE Y APLICACIÓN

The epoxy floor to be coated must be clean, dry and lightly sanded. Mix components A and B with a low-speed mechanical mixer until homogeneous (at least 2–3 minutes) and apply the mix within its pot life. Apply in thin coats by roller or brush. Ambient and floor temperature must be between +10 °C and +30 °C and relative humidity below 80%; floor temperature must be kept at least 3 °C above the dew point.

 

ÁREAS DE APLICACIÓN

→ Car Parks and Ramps

→ Outdoor Areas, Terraces and Roofs

 

Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.

CARACTERÍSTICAS PRINCIPALES

— High UV resistance

— Resistance to yellowing and chalking

— Topcoat over epoxy systems

— Also suitable for metal surfaces

SISTEMA RECOMENDADO

IMPRIMACIÓN

Applied over epoxy floor systems (659, 660).

El sistema adecuado para su suelo, con el equipo técnico de Genfloor.

Nuestros expertos le acompañan en cada fase del proyecto: análisis del suelo, medición de humedad, selección del sistema y cálculo de consumo.

bottom of page