Genfloor / Acrylic Floor and Road Marking / 842 Gen Floor Paint
ACRYLIC FLOOR AND ROAD MARKING · TOPCOAT
842
Gen Floor Paint
1K · Acrylic / MMA · Floor paint
Fast-drying, single-component acrylic floor paint for concrete and asphalt.
A single-component, solvent-borne, air-curing decorative and protective floor paint made of acrylic oligomer and MMA monomer, suitable for concrete and asphalt surfaces.
Technical Data
LIGANTE
Acrylic oligomer / MMA
COMPONENTES
Single-component (1K)
POSICIÓN EN EL SISTEMA
Topcoat
DENSIDAD
1.25 ± 0.1 kg/L
SÓLIDOS EN VOLUMEN
50% ± 5
RENDIMIENTO TEÓRICO
5 m²/kg (single coat)
DILUCIÓN
Do not thin; ready to use
MÉTODO DE APLICACIÓN
Roller, brush
NÚMERO DE CAPAS
2 coats
RENDIMIENTO
—
RENDIMIENTO
—
RENDIMIENTO
—
SECADO
Touch dry 7 h · Recoat 24 h · Fully dry 24 h
ENVASE
18 kg
COLOR
Stock colours: RAL 5015 Blue, RAL 7040 Grey, RAL 1003 Yellow, RAL 3020 Red, RAL 6024 Green, RAL 9003 White, RAL 9005 Black
DOCUMENTOS TÉCNICOS
Uso y aplicación
USOS
Used on cycle paths, areas with light pedestrian traffic, warehouses, walkways, shop and office floors and all areas where fast drying is expected.
PREPARACIÓN DE SUPERFICIE Y APLICACIÓN
Remove dust, dirt and oil; scrape off old paint residues and repair cracks with repair mortar. The surface must be completely dry. Stir the product thoroughly and apply two coats by roller or brush, allowing 24 hours between coats. Application temperature must be between +5 °C and +30 °C.
ÁREAS DE APLICACIÓN
→ Shopping Centres, Retail, Schools and Offices
→ Roads, Cycle Paths and Walkways
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
CARACTERÍSTICAS PRINCIPALES
— Single-component, ready to use
— Suitable for concrete and asphalt
— Fast drying
— 7 stock colours
SISTEMA RECOMENDADO
IMPRIMACIÓN
841 Gen Floor Paint Primer
CAPAS SIGUIENTES
843 Gen Floor Paint Protective Varnish