Gen Marine / Primers and Anti-corrosive Systems / 605 Genepox Fast Primer
PRIMERS AND ANTI-CORROSIVE SYSTEMS · PRIMER / TOPCOAT
605
Genepox Fast Primer
2K · Fast drying · On-board maintenance
Multi-purpose, surface-tolerant, fast-drying primer/topcoat compatible with all topcoats; ideal for on-board maintenance.
A multi-purpose, surface-tolerant primer/topcoat. As all topcoats can be applied over it, it is an ideal on-board primer. Its fast drying allows maintenance at sea and during short port stays.
Technical Data
LIANT
Modified epoxy
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Primer / topcoat
DENSITÉ
1,45 ± 0,1 kg/L
EXTRAIT SEC EN VOLUME
%65 ± 3
RENDEMENT THÉORIQUE
6,5 m²/L (100 µm DFT)
DILUTION
Gen Epoxy Thinner
MÉTHODE D’APPLICATION
Airless spray, brush, roller
PRÉPARATION DE SURFACE
St 2–St 3 or Sa 2
NOMBRE DE COUCHES
1–2 coats
PRODUITS COMPATIBLES
623, 769, 776
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
—
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Decks, holds, hatch covers and other steel structures requiring fast drying; submerged areas, accommodation and ballast tanks; sound aged coatings of various types.
PRÉPARATION DE SURFACE ET APPLICATION
Remove salts, grease and loose rust; clean to St 2–St 3 or blast to Sa 2. Abrade sound old coatings. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ZONES DU NAVIRE ADAPTÉES
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
POINTS FORTS
— Fast drying, short maintenance time
— Surface tolerant
— Compatible with all topcoats
— Use as primer or topcoat
SYSTÈME RECOMMANDÉ
COUCHES SUIVANTES
623 Genepox Finish Marine, 776 Genpoly ACR Topcoat Marin or 769 Genacryl Finish