Gen Marine / Primers and Anti-corrosive Systems / 606 Genepox SX HS
PRIMERS AND ANTI-CORROSIVE SYSTEMS · PRIMER / INTERMEDIATE
606
Genepox SX HS
2K · High solids · Surface tolerant
Modified epoxy, high-solids, surface-tolerant multi-purpose repair and maintenance primer.
An anti-corrosive, modified epoxy, multi-purpose and surface-tolerant primer with excellent adhesion and hardness. It can be used as a topcoat where cosmetic appearance is not critical.
Technical Data
LIANT
Modified epoxy
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Primer / intermediate
DENSITÉ
1,50 ± 0,1 kg/L
EXTRAIT SEC EN VOLUME
%70 ± 3
RENDEMENT THÉORIQUE
5,6 m²/L (125 µm DFT)
DILUTION
Gen Epoxy Thinner
MÉTHODE D’APPLICATION
Airless spray, brush, roller
PRÉPARATION DE SURFACE
St 2–St 3 or Sa 2½
NOMBRE DE COUCHES
1–2 coats (125–150 µm DFT)
PRODUITS COMPATIBLES
603, 623, 776
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
—
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Anti-corrosive, surface-tolerant repair and maintenance paint for decks, holds, hatch covers, other steel structures, submerged areas, accommodation and ballast tanks.
PRÉPARATION DE SURFACE ET APPLICATION
Remove salts, grease and loose rust; prepare to St 2–St 3 or Sa 2½. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ZONES DU NAVIRE ADAPTÉES
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
POINTS FORTS
— High solids
— Excellent adhesion and hardness
— Surface tolerant, ideal for repair
— Can be used as a topcoat
SYSTÈME RECOMMANDÉ
COUCHES SUIVANTES
776 Genpoly ACR Topcoat Marin or 623 Genepox Finish Marine