Gen Marine / Primers and Anti-corrosive Systems / 609 Genepox Tiecoat Primer
PRIMERS AND ANTI-CORROSIVE SYSTEMS · TIE COAT
609
Genepox Tiecoat Primer
2K · Modified epoxy · Under antifouling
Anti-corrosive modified epoxy primer acting as an adhesion bridge for the antifouling applied over it.
An anti-corrosive epoxy primer based on modified epoxy resin and special pigments. Besides film hardness and corrosion resistance, it especially improves the adhesion of the antifouling applied over it.
Technical Data
LIANT
Modified epoxy
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Tie coat
DENSITÉ
1,35 ± 0,1 kg/L
EXTRAIT SEC EN VOLUME
%50 ± 3
RENDEMENT THÉORIQUE
6,7 m²/L (75 µm DFT)
DILUTION
Gen Epoxy Thinner
MÉTHODE D’APPLICATION
Airless spray, brush, roller
PRÉPARATION DE SURFACE
Clean, dry epoxy primer
NOMBRE DE COUCHES
1 coat (75 µm DFT)
PRODUITS COMPATIBLES
603, 651
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
—
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Adhesion bridge under antifouling on maintenance and repair vessels; outer hull, deck and accommodation.
PRÉPARATION DE SURFACE ET APPLICATION
Apply over the epoxy primer within its overcoating interval. On aged systems wash the surface, remove loose paint and roughen. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ZONES DU NAVIRE ADAPTÉES
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
POINTS FORTS
— Adhesion bridge for antifouling
— Corrosion resistance
— Hard, durable film
— Suitable for maintenance and repair
SYSTÈME RECOMMANDÉ
PRIMAIRE
603 Genepox Zinc Rich Primer or 651 Gencoat Marin
COUCHES SUIVANTES
Antifouling topcoat