Gen Marine / Intermediates and Topcoats / 620 Genepox Topcoat
INTERMEDIATES AND TOPCOATS · TOPCOAT
620
Genepox Topcoat
2K · Epoxy · Chemical resistance
Two-component epoxy topcoat cured with polyamide, resistant to water, seawater, chemicals and abrasion.
A two-component, reaction-curing epoxy topcoat cured with a polyamide hardener. It performs very well in general industry, machinery, metal protection and marine applications.
Technical Data
LIANT
Epoxy-polyamide
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Topcoat
DENSITÉ
1,35 ± 0,1 kg/L
EXTRAIT SEC EN VOLUME
%55 ± 3
RENDEMENT THÉORIQUE
9 m²/kg (single coat)
RAPPORT DE MÉLANGE
By weight 4 : 1 (A : B)
DILUTION
016 Gen Epoxy Thinner
MÉTHODE D’APPLICATION
Brush, roller, airless sprey
PRODUITS COMPATIBLES
601
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
3 kg set (2,4 kg A + 0,6 kg B) · 20 kg set (16 kg A + 4 kg B)
TEINTE
RAL renk kartelasındaki renklerde, talep üzerine üretilir.
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
All metal and mineral surfaces exposed to water, seawater, chemicals and abrasion; holds, engine rooms and interiors; epoxy topcoat in marine applications.
PRÉPARATION DE SURFACE ET APPLICATION
Apply over a clean, dry epoxy primer within its overcoating interval. Mix A and B and apply by airless spray, brush or roller. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ZONES DU NAVIRE ADAPTÉES
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
POINTS FORTS
— Water and seawater resistance
— Chemical and abrasion resistance
— Hard, durable film
— For metal and mineral surfaces
SYSTÈME RECOMMANDÉ
PRIMAIRE
601 Genepox Primer