Gen Marine / Intermediates and Topcoats / 623 Genepox Finish Marine
INTERMEDIATES AND TOPCOATS · TOPCOAT
623
Genepox Finish Marine
2K · Epoxy-polyamide · Abrasion resistant
Epoxy-polyamide, abrasion-resistant gloss topcoat with excellent toughness and adhesion for decks and hulls.
An epoxy-polyamide based, abrasion-resistant gloss topcoat with excellent toughness and adhesion. Ideal for bilges and side walls.
Technical Data
LIANT
Epoxy-polyamide
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Topcoat
DENSITÉ
1,30 ± 0,1 kg/L
EXTRAIT SEC EN VOLUME
%60 ± 3
BRILLANT / ASPECT
Gloss
RENDEMENT THÉORIQUE
6,0 m²/L (100 µm DFT)
DILUTION
Gen Epoxy Thinner
MÉTHODE D’APPLICATION
Airless spray, brush, roller
NOMBRE DE COUCHES
1–2 coats (100 µm DFT)
PRODUITS COMPATIBLES
601, 605
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
—
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Ship hulls and decks of steel ships, bridges and other steel structures; heavy industrial and marine environments; especially decks and floors of boats.
PRÉPARATION DE SURFACE ET APPLICATION
The epoxy primer must be clean, dry and within its overcoating interval. Mix A and B and apply by airless spray, brush or roller. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ZONES DU NAVIRE ADAPTÉES
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
POINTS FORTS
— High abrasion resistance
— Excellent adhesion and toughness
— Gloss finish
— Ideal for bilges and side walls
SYSTÈME RECOMMANDÉ
PRIMAIRE
601 Genepox Primer or 605 Genepox Fast Primer