Gen Marine / Intermediates and Topcoats / 651 Gencoat Marin
INTERMEDIATES AND TOPCOATS · PRIMER / TOPCOAT
651
Gencoat Marin
2K · Epoxy · Immersion service
Multi-purpose, surface-tolerant epoxy primer/topcoat; ideal for immersion service and repair work on board.
A two-component, epoxy-based, multi-purpose and surface-tolerant marine primer/topcoat with excellent adhesion and hardness, ideal for repair work on board.
Technical Data
LIANT
Epoxy
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Primer / topcoat
DENSITÉ
1,30 ± 0,05 kg/L
EXTRAIT SEC EN VOLUME
%65 ± 2
RENDEMENT THÉORIQUE
5,2 m²/L (125 µm DFT)
DILUTION
Gen Epoxy Thinner
MÉTHODE D’APPLICATION
Airless spray, brush, roller
PRÉPARATION DE SURFACE
Sa 2½ or St 3
NOMBRE DE COUCHES
2 coats (2 × 125 µm DFT)
PRODUITS COMPATIBLES
603, 609
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
—
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Decks, holds, hatch covers, other steel structures and underwater areas; immersion service on ships, barges, port facilities and offshore structures.
PRÉPARATION DE SURFACE ET APPLICATION
Blast steel to ISO 8501-1 Sa 2½ (roughness 40–75 µm) and remove salts, grease and dust. St 3 power-tool cleaning may be used for local repairs. Mix A and B and apply by airless spray, brush or roller. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ZONES DU NAVIRE ADAPTÉES
→ Offshore and Port Structures
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
POINTS FORTS
— Resistant to immersion
— Surface tolerant
— Use as primer and topcoat
— Ideal for repair and maintenance
SYSTÈME RECOMMANDÉ
COUCHES SUIVANTES
Underwater: 609 Genepox Tiecoat Primer + antifouling