Gen Marine / Tank and Special Coatings / 673 Gencoat Pipe
TANK AND SPECIAL COATINGS · TANK LINING
673
Gencoat Pipe
2K · Solvent-free epoxy · Potable water
Solvent-free, benzyl-alcohol-free hygienic epoxy for fresh water tanks and potable water pipes.
A two-component, solvent-free, epoxy-based hygienic coating. It contains no benzyl alcohol and gives a smooth, glossy surface.
Technical Data
LIANT
Solvent-free epoxy
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Tank lining
DENSITÉ
1,28 ± 0,1 kg/L
EXTRAIT SEC EN VOLUME
~%100
RENDEMENT THÉORIQUE
4,0 m²/L (250 µm DFT)
MÉTHODE D’APPLICATION
Airless spray, brush
PRÉPARATION DE SURFACE
Sa 2½ (ISO 8501-1)
NOMBRE DE COUCHES
1–2 coats
RENDEMENT
—
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
—
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Fresh water tanks of boats and ships; especially potable water pipes and tanks; cooling water pipelines of power plants, sewage pipelines and steel structures of petrochemical plants.
PRÉPARATION DE SURFACE ET APPLICATION
Blast steel to ISO 8501-1 Sa 2½ (roughness 40–75 µm) and remove salts, grease and dust. St 3 power-tool cleaning may be used for local repairs. Mix A and B mechanically and apply by airless spray or brush. Fully cure and rinse the tank before service. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ZONES DU NAVIRE ADAPTÉES
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
POINTS FORTS
— Solvent-free, no benzyl alcohol
— Hygienic, smooth and glossy surface
— For potable water tanks
— High film build
SYSTÈME RECOMMANDÉ
—