Gen Marine / Primers and Anti-corrosive Systems / 710 Genacryl Primer
PRIMERS AND ANTI-CORROSIVE SYSTEMS · PRIMER
710
Genacryl Primer
1K · Acrylic · MIO pigmented
Fast-drying modified acrylic anti-corrosive primer with micaceous iron oxide (MIO) for topsides and superstructure steel.
A modified acrylic anti-corrosive primer containing micaceous iron oxide (MIO). Fast drying, it can be applied directly on cleaned steel or over acrylic-epoxy coatings.
Technical Data
LIANT
Modified acrylic
COMPOSANTS
Single-component (1K)
POSITION DANS LE SYSTÈME
Primer
DENSITÉ
1,00 ± 0,05 kg/L
EXTRAIT SEC EN VOLUME
%50 ± 3
RENDEMENT THÉORIQUE
8,3 m²/L (60 µm DFT)
MÉTHODE D’APPLICATION
Airless spray, brush, roller
PRÉPARATION DE SURFACE
St 3 or Sa 2½
NOMBRE DE COUCHES
1–2 coats
PRODUITS COMPATIBLES
769
RENDEMENT
—
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
—
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Primer for abrasion and corrosion protection on topsides, accommodation and other superstructure steel; suitable for all wooden, fibreglass and steel boats.
PRÉPARATION DE SURFACE ET APPLICATION
The surface must be clean, dry and free of grease and salts; St 3 or Sa 2½ preparation is recommended. Apply by brush, roller or airless spray. Steel temperature must be at least 3 °C above the dew point.
ZONES DU NAVIRE ADAPTÉES
→ Superstructure and Accommodation
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
POINTS FORTS
— Barrier protection with MIO
— Fast drying
— Can be applied over acrylic and epoxy coatings
— For steel, wood and fibreglass
SYSTÈME RECOMMANDÉ
COUCHES SUIVANTES
769 Genacryl Finish