Gen Marine / Intermediates and Topcoats / 776 Genpoly ACR Topcoat Marin
INTERMEDIATES AND TOPCOATS · TOPCOAT
776
Genpoly ACR Topcoat Marin
2K · Aliphatic PU acrylic · UV resistance
Aliphatic polyurethane acrylic gloss topcoat with high UV resistance and low VOC for topsides, decks and superstructure.
A two-component, aliphatic polyurethane acrylic isocyanate-based gloss topcoat. It has high UV resistance, low VOC and high elasticity, and resists physical and chemical wear.
Technical Data
LIANT
Aliphatic polyurethane acrylic
COMPOSANTS
Two-component (2K)
POSITION DANS LE SYSTÈME
Topcoat
DENSITÉ
1,25 ± 0,1 kg/L
EXTRAIT SEC EN VOLUME
%55 ± 5
BRILLANT / ASPECT
Gloss
RENDEMENT THÉORIQUE
11,0 m²/L (50 µm DFT)
DILUTION
Gen Polyurethane Thinner
MÉTHODE D’APPLICATION
Airless spray, brush, roller
NOMBRE DE COUCHES
1–2 coats (50–60 µm DFT)
PRODUITS COMPATIBLES
601, 603, 605, 606
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
—
TEINTE
RAL and standard marine colours
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Exterior steel surfaces requiring long-lasting colour and gloss; machinery, tanks, topsides, decks, holds and hatch covers.
PRÉPARATION DE SURFACE ET APPLICATION
The epoxy primer/intermediate must be clean, dry and within its overcoating interval. Mix A and B and apply by airless spray, brush or roller. Steel surface temperature must be at least 3 °C above the dew point and relative humidity below 85%. Use the mixture within its pot life.
ZONES DU NAVIRE ADAPTÉES
→ Superstructure and Accommodation
→ Offshore and Port Structures
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific paint specifications and system design.
POINTS FORTS
— High UV resistance, lasting colour and gloss
— Low VOC
— High elasticity
— Physical and chemical wear resistance
SYSTÈME RECOMMANDÉ
PRIMAIRE
601 Genepox Primer, 603 + 606 or 605 Genepox Fast Primer