Gen Industrial / Rapid Alkyd Systems / 503 Gen Industrial Paint
RAPID ALKYD SYSTEMS · TOPCOAT
503
Gen Industrial Paint
1K · Rapid alkyd · Gloss
Air-drying, gloss (65–70) industrial topcoat based on rapid alkyd resin.
An air-drying gloss topcoat based on rapid alkyd resin. With fast drying, high hiding power and economical coverage, it is the standard topcoat solution for industrial production.
Technical Data
LIANT
Rapid alkyd resin
COMPOSANTS
Single-component (1K)
POSITION DANS LE SYSTÈME
Topcoat
DENSITÉ
1.45 ± 0.1 kg/L
EXTRAIT SEC EN VOLUME
54% ± 3
BRILLANT / ASPECT
Gloss (65–70)
RENDEMENT THÉORIQUE
12 m²/kg (single coat)
DILUTION
Max. 15–20%, 015 Gen Industrial Thinner
MÉTHODE D’APPLICATION
Brush, roller, airless spray gun
PRÉPARATION DE SURFACE
Sa 2½ (ISO 8501-1)
NOMBRE DE COUCHES
At least 2 coats
RENDEMENT
—
SÉCHAGE
—
CONDITIONNEMENT
850 g · 2.7 kg · 14 kg
TEINTE
Stock RAL colours — Group 1: RAL 1015, 6011, 7001, 7004, 7016, 7035, 7040, 8002, 8011, 9002, 9003, 9005 · Group 2: RAL 3009, 3015, 5002, 5005, 5010, 5012, 5015, 5021, 6005, 6026, 7006, 9006 · Group 3: RAL 1003, 1004, 1018, 1023, 1033, 2004, 3001, 3020, 5013, 6010, 6018, 6037. Other RAL colours produced on request.
DOCUMENTS TECHNIQUES
Utilisation et application
DOMAINES D’UTILISATION
Used in industrial plants, steel structure fabrication, machinery manufacturing, trailer manufacturing and the agricultural machinery industry.
PRÉPARATION DE SURFACE ET APPLICATION
The surface must be clean and dry, and free from oil, grease, dust, rust, salts and any contamination that could reduce adhesion. Metal surfaces must be abrasive blast-cleaned to at least Sa 2½ according to ISO 8501-1 and primed with 504 Gen Rapid Primer or 505 Gen Anticorrosive Rapid Primer within 6 hours of blasting. Apply the topcoat once the primer has dried. Thin by max. 15–20% with 015 Gen Industrial Thinner and apply at least 2 coats. Surface temperature must be at least 10 °C. Surface temperature must be at least 3 °C above the dew point; do not apply on wet or damp surfaces.
SECTEURS D’UTILISATION
→ Machinery and Equipment Manufacturing
→ Vehicle-Mounted Equipment, Trailers and Bodies
→ Construction Machinery, Tractors and Agricultural Machinery
→ Heating Systems, Furnaces, Chimneys and Exhausts
→ Drums, Metal Packaging and Metal Goods
Technical data are average values at 20 °C and 65% relative humidity. Coverage varies with surface roughness, application method and film thickness. Consult the Gen Boya technical team for project-specific system design.
POINTS FORTS
— Gloss finish: 65–70 gloss
— Fast drying
— 36 stock RAL colours, other RAL colours on request
— High hiding power
— Can be applied by brush, roller and airless spray
SYSTÈME RECOMMANDÉ
PRIMAIRE
504 Gen Rapid Primer or 505 Gen Anticorrosive Rapid Primer